Quality Tested by :
Furniture Industires Research Association of UK
Performance
Testing and Evaluation
FIRA is a NEMAS TESTING Laboratory		 fera logo Sundek Laminates-laminates, plastic laminates, high pressure plastic laminates, decorative laminates, high pressure decorative laminates, industrial lamintes
Test Report
    Sundek India Limited,
    204, Lalita Complex,
    Rasala Marg,
    Navarangpura,
    Ahmedabad - 380 009
    INDIA
    Our Ref : 8575 / LOB
    Your Ref : SIL : EXIM : 298 : 95
    Date : 18 / 05 / 95
    Date of Receipt of Goods : 24 / 02 / 95
TABLE OF REQUIREMENTS AND RESULTS
Property
Test Method Part 2
Property Or Attributes
Units
Laminate HGS
Test Result Mysore Ivory
Thickness 4 Maximum Variation mm ±0.10 0.007
Resistance To Surface Wear 6 Wear Resistance Revs IP
(min)FP		 130
150		 400
950
Resistance To Immersion In Boiling Water 7 Mass Increase Thickness Appearance % (max)
% (max)
Rating		 8.5
10.0
4		 3.1
2.6
5
Resistance To Dry Heat 8 Appearance
Other Finish		 Rating 4 4
Dimensional Stability At Elevated Temps. 9 Dimensional Change % CM
% M		 0.95
0.50		 0.50
0.05
Resistance To
Staining		 13 Suceptibility Rating (Not worse than ) 4 5
Resistance To
Staining		 14 Load N ( Min ) => 2.0 > 2
Resistance To
Staining		 15 Appearance
Group 1 & 2
Group 3 & 4		 Rating (not worse than) 5
4		 5 5/4
Resistance To
Colour Change
In Xenon Arch Light		 16 Wool Standard Min 6 >6
Resistance To
Cigarette Burns		 18 Appearance Rating (not worse than) 3 Brand A 4
Brand B 4
Brand C 4
Resistance To
Steam 		24 Appearance Rating (not worse than) 4 5
Comments :

The results for the submitted plastic laminate sample are displayed on the table above together with the HGS, S333 requirements.

The submitted Mysore Ivory Decorative HGS Grade Laminate Sheet meets the BS EN 438, S333, requirements.

Report By: Lisa O 'Brien
Approved By: Sue Calver

Copyright © 2004. Sundek International All rights reserved.